Model – ELECTRO-M ( CE Certified)
The setup consists of all major subsystems along with standard accessories and tools.
Specifications
# Tool / workpiece travel along X axis 150 mm
# Tool / workpiece travel along Y axis 150 mm
# Tool / workpiece travel along Z axis 100 mm
# Job holding area 200 mm × 200 mm × 40 mm
# Minimum speed of tool movement (in all three axes) 0.03 mm/min (0.5 µm / s)
# Maximum speed of tool movement (in all three axes) 10 mm/min
# Achievable increment in tool movement speed (in all three axes) 0.1 µm / s
# Tool / workpiece feed motor Servo stepper motor in all three axes
# PP (polypropylene) Material for electrolyte holding tank PP is electrically non-conducting and Non-corrosive in
Nature. Material for the main frame of the machine
# Machine frame type Stainless steel or Aluminium Open frame structure with a provision for protection from dust
# Spindle rotation Maximum up to 5000 RPM Run out not more than 1 µm
# Footprint of the machine 1500 mm ×1500 mm
# Load bearing capacity Minimum 5 Kgs